AIRVOLUTION offers solutions to warehouses, offices, and retail stores for commercial heating, ventilation and air conditioning (HVAC).
We offer roof ducted systems, ventilation, refrigeration, and package units and can tailor a solution for any commercial need!
Use the form below to drop us an email if you have any question or comments.
- Ducted Heating and Cooling Frankston
- Ducted Heating and Cooling Springvale
- Ducted Heating and Cooling Southbank
- Ducted Heating and Cooling Ringwood
- Ducted Heating and Cooling Richmond
- Ducted Heating and Cooling Pakenham
- Ducted Heating and Cooling Narre Warren
- Ducted Heating and Cooling Mornington
- Ducted Heating and Cooling Moorabbin
- Ducted Heating and Cooling Malvern
- Ducted Heating and Cooling Lilydale
- Ducted Heating and Cooling Hampton
- Ducted Heating and Cooling Hallam
- Ducted Heating and Cooling Bayswater
- Ducted Heating and Cooling Ferntree Gully
- Ducted Heating and Cooling Emerald
- Ducted Heating and Cooling Warragul
- Ducted Heating and Cooling Croydon
- Ducted Heating and Cooling Cranbourne
- Ducted Heating and Cooling Cheltenham
- Ducted Heating and Cooling Carrum Downs
- Ducted Heating and Cooling Bulleen
- Ducted Heating and Cooling Brighton
- Ducted Heating and Cooling Berwick
- Ducted Heating and Cooling Beaconsfield
Frequently Asked Questions
It will depend on the model and size of the heating system you have installed at your home. With the introduction of adaptive zoning, it is possible to operate heating in specific areas of your home. Please contact us for more information.
No – Evaporative cooling systems need to operate with all vents open. Closing vents can be detrimental to its operation and cause humidity within the home. This can lead to ruined furniture and floors that become slippery and dangerous.
Only when your existing heating system has been designed to do so. This is critical as these systems will not cool properly and be expensive to run otherwise. Larger and higher insulated ducting is required when add-on cooling is attached to a gas ducted heating system.
Yes! Ceiling heating systems are a growing requirement in residential homes across Australia. Airvolution Heating & Cooling can design the system to blow the air down to floor level and install the return air at low level.
No – Unfortunately, evaporative cooling needs a much greater volume of air. The ducting for evaporative cooling is much larger than that of gas ducted heating.
No – not unless you are a licensed plumber, electrician or both depending on what system you have. Licensed tradespeople will ensure you keep all manufacturer warranties by supplying you with a compliance certificate after the installation.
Yes – Airvolution Heating & Cooling can supply you with a heater or cooler that can be operated via a remote. Please talk to our consultant at the time of the quote as it is dependent on what type of system you install.
One day – Most installations are completed within a day. Airvolution Heating & Cooling will inform you of the time frame when we are scheduling your job for installation.
Yes! Doors or windows must be open as evaporative cooling systems operate via airflow. This is a critical part of operating your evaporative cooler.
This will depend on the humidity level on the day of operation. Higher humidity will have a direct impact on the evaporation rate of water over the pads. The size of the cooler and the speed of the fan will also change your consumption. Evaporative cooling is the cheapest and healthiest form of cooling for your home.
Melbourne normally has the ideal weather conditions to operate evaporative cooling, however, the dryer the day the better the system will work.
Yes – However, quite often there is only a marginal cost difference to install a reverse cycle (heating and cooling) system.
Split system does not mean heating and cooling. It relates to the air conditioning unit being split into two parts (indoor head and outdoor compressor).
Daikin has a great reputation in the market as a quality product. Airvolution Heating & Cooling are dealers for Daikin, Panasonic and ActronAir. We believe every house and room is different and will recommend the best unit for your home.
Reset when the unit is not working – Press FN then 1 to get an error code. Press FN then 1 then 4 to reset the controller
You will need to remove the controller from the wall. Please see the video below.